Saturday, November 20, 2010

How do you change a valve cover gasket on a 95 Chrysler Le Baron?

i need to change the valve cover gasket and the back side of the V6. what should i take off to get to it? what are the Torque specs?How do you change a valve cover gasket on a 95 Chrysler Le Baron?
you will have to carefully remove anything that will prevent you from lifting the valve covers off,then remove the bolts that fasten the valve covers, remove the covers and clean off all the old gasket on the heads and cover,replace the new gasket and covers and tighten the bolts.caution do not over tighten the bolts just tight enough so they will not leak,check them once or twice a weak and tighten if necessary.forgot to mention tighten them equally.How do you change a valve cover gasket on a 95 Chrysler Le Baron?
Follow the link below for a step by step description of the repair, (All Data repair section can be purchased for your specific vehicle) the second link shows the steps required to service the cam plugs, also a point of leakage.



Valve cover seal

http://www.autozone.com/shopping/repairG



cam plug seal

http://www.autozone.com/shopping/repairG